Fantech DBF110 Dryer Booster System. Fantech dryer booster fans are designed to eliminate the problems that can be caused by long duct work from your clothes dryer. Long stretches of duct work with multiple elbows can cause extended drying time as well as lint and moisture build-up within the dryer duct.
Originally dryers were designed to be located on an outer wall able to vented directly outside. Newer homes and condo are being designed so that the laundry is located on interior walls making it necessary to have extensive lengths of duct work to ventilate the dryer outside.
You will need a DBF110 Fantech Dryer Booster System when the length of your dryer duct work exceeds: 25 feet with no bends
20 feet with one bend
15 feet with two bends
10 feet with three bends

• For maximum sensitivity, switch diaphragm must be mounted vertically.
• Fan must be mounted a minimum of 15 linear feet from the dryer in order to prevent the impeller from loading with we lint.
• Fan should be inspected periodically, depending on amoutn of usage and cleaned as necessary.
• Fan inlet and outlet are 3 7/8" diameter allowing direct installation into dryer vent duct.
• Motor bearings are a permanently sealed, self lubrication ball type.
• DBF110 fan is backed by Fantech's Five Year Warranty

Fan housing is constructed of UV resistant ABS-PC blend thermoplastic
Motor is equipped with an automatic reset thermal overload protection
Motor is acceptable for continuous use
The motorized impeller is both statically and dynamically balanced as one integral unit so it will provide a vibration free performance.